ZR-1 Net Registry Forums - View Single Post - Plenum Pull Advice, Starter Rebuild, MAP Sensor Info

mgbrv8 · 03-21-2013

Dose the zr1 have a orfice tube in the a/c system and were? When I have the system open I Am going to replace the accumulator, Change the high pressure and low pressure switches with new ones, Flush the entire system, Rebuild the AC compressor, Straighten the fins on the condenser, And replace all the O-rings And then vacuum it down and check for leaks And then pressurize it with nitrogen and check for leaks. Can anyone think of anything that I'm missing On a complete r12 overhaul and re-installation??

Dave

03-21-2013	#62
mgbrv8 Join Date: Jul 2009 Location: Texas Posts: 790	Re: Plenum pull advice Dose the zr1 have a orfice tube in the a/c system and were? When I have the system open I Am going to replace the accumulator, Change the high pressure and low pressure switches with new ones, Flush the entire system, Rebuild the AC compressor, Straighten the fins on the condenser, And replace all the O-rings And then vacuum it down and check for leaks And then pressurize it with nitrogen and check for leaks. Can anyone think of anything that I'm missing On a complete r12 overhaul and re-installation?? Dave