View Single Post
Old 03-21-2013   #64
VetteVet
 
VetteVet's Avatar
 
Join Date: Jan 2009
Location: Mandeville, LA
Posts: 340
Default Re: Plenum pull advice

Quote:
Originally Posted by Dynomite View Post
There is a screen with "O" ring sitting in the vertical tube (high pressure side) of the evaporator.
Cliff's got it right. If you break the fitting where the high pressure line(small diameter one) goes into the bottom of the evaporator housing, you will find the orifice tube down inside the line on the evaporator side. You can grab the little plastic tab with a pair of needlenose pliers and wiggle/twist the orifice tube/screen out.

Jep
VetteVet is offline   Reply With Quote