Quote:
Originally Posted by Locobob
It's 36+mm throughout except for the primary runners which funnel down from 36mm about half way down the injector housings to 34mm where it meets the head - stock primary head ports are 32mm at the gasket surface.
|
Nice work. How about a dumb Q from a guy who has to sweat class rules.
If primary head port is 32mm, what is secondary head port size (stock)?
I ask because I'm limited with respect to work in the head, can only go in one inch. That would seem to be enough to take up the 32 to 34mm...
Hmmm... Mo Powah - tasty!
- Jeff