ZR-1 Net Registry Forums - View Single Post

rhipsher · 07-22-2013

The input shaft pilot bushing needs to be replaced. I've removed my transmission 3 times on my 90 until I found out that the reason I was breaking TB was due to a bent clutch fork. It's a job but doesn't take a specialist. If your clutch doesn't engage until 3/4 of the peddle travel is let out then that's normal. If the clutch engages 1" off the floor board then you have to worry.

07-22-2013	#2
rhipsher Join Date: Aug 2008 Location: Houston, TX Posts: 2,314	Re: New (to me) ZR1 with Trans Problem? The input shaft pilot bushing needs to be replaced. I've removed my transmission 3 times on my 90 until I found out that the reason I was breaking TB was due to a bent clutch fork. It's a job but doesn't take a specialist. If your clutch doesn't engage until 3/4 of the peddle travel is let out then that's normal. If the clutch engages 1" off the floor board then you have to worry. Last edited by rhipsher; 07-22-2013 at 12:14 AM.