ZR-1 Net Registry Forums - View Single Post

Franke · 07-23-2013

Schrade, Something else I just read in the driveability and emissions section states that..." voltage should increase at a STEADY rate as throttle is moved toward WOT about 4.6 volts. The ECM has the ability to auto zero the TPS voltage if it between .46 volt and .62 volt. This means that any voltage between .46 and .62 will be determined by the ECM to be 0% throttle". From that statement I gather that the TPS should be linear. Correct?

07-23-2013	#10
Franke Join Date: May 2013 Location: Beaver, PA Posts: 515	Re: TPS response... Schrade, Something else I just read in the driveability and emissions section states that..." voltage should increase at a STEADY rate as throttle is moved toward WOT about 4.6 volts. The ECM has the ability to auto zero the TPS voltage if it between .46 volt and .62 volt. This means that any voltage between .46 and .62 will be determined by the ECM to be 0% throttle". From that statement I gather that the TPS should be linear. Correct?