View Single Post
Old 08-28-2013   #2
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
Default Bilstein FX-3 Actuators

When you turn the key to "Run", the actuator goes CCW and then back CW or CW and then CCW.....but both directions like it is searching for end points.

The Actuator gear teeth (you can see the gear looking in the open end of the Actuator) which are plastic get broken. I had a front Actuator just dead in the water recently (electrical issue). Corvettenutz has used Actuators in stock.

92-95 front Actuator part # is 22114407 (rear is part # 22114337). I actually had an extra Actuator #22114407 (92-95) which worked fine on my 91'.

The 89-91 front Actuator part # is 22075651 (rear is part # 22075652) . The 89-91 Actuators and 92-95 Actuators are interchangeable as far as I know (the difference between Rear and Front Actuators is the length of the attached electrical cable).

Ebay ZR-1 FX-3 Bilstein Shock Actuators

FX3 Actuator Rebuild TIPS

Last edited by Dynomite; 08-28-2013 at 10:41 PM.
Dynomite is offline   Reply With Quote