View Single Post
Old 08-29-2013   #9
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,816
Default Re: Active suspension questions

Quote:
Originally Posted by emmvette View Post
When you turn the key to run and the actuators turn both directions, can this be noticed with everything connected? In other words, can you hear or feel it?

Or would I need to take something apart to verify they are turning when the key goes to the run position? Out of curiousity, I checked mine that way and didn't feel or hear anything.

Oh, so much I have to learn!
Have someone turn the key on and with the Actuator connected electrically but not installed on top of FX3 Bilstein.....hold Actuator in your hand and look inside the Actuator and you can see the teeth (gear) rotate back and forth then stop.

Now if you guys take an Actuator apart, post up as that will be exciting

Oh....and apparently when you install the actuator on top of shock you do not have to align the gear on top of shock.........But I did

I centered the gear as it rotates I think 160 deg total and I centered at 80 deg from one stop....but I think that was not necessary

Last edited by Dynomite; 08-29-2013 at 07:22 PM.
Dynomite is offline   Reply With Quote