Quote:
Originally Posted by Coupe89
What did you use to cap off the coolant line on the passenger side? Was it capped on the rubber hose or the metal?
|
A brass nipple that fits tight inside the rubber hose with a male 1/4 inch pipe thread and a 1/4 inch Brass pipe thread cap (female thread) 
I left about 2 or 3 inches of rubber hose above the "T" that connects (did connect) the TB vent, Radiator top vent, and Coolant surge container in front of passenger side (the highest point in the LT5 Coolant System).
See Tech Info - LT5 Coolant Flow Calculations
See Item #4 LT5 Eliminated Systems
See Filling With Coolant and the Air Locked Water Pump
