Re: Loose Bolts
Quote:
|
Originally Posted by Jeffvette
It happens, I've had a few motors that have been like that. Might cause a small vacuum leak that is hard to track down. They are not torqued down very hard in the first place.
|
If low torque results in loosening over time, then I would recommend application of a low strength Loctite or similar brand product. That type of vacuum leak would be a real bear to track down....almost like your secondary shaft seals Jeff. Wow!!
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.
|