ZR-1 Net Registry Forums - View Single Post

Franke · 09-28-2013

A note in chapter 7 says TTS has found that MOST USB adapters fail to operate correctly for recording ALDL data. For this reason, it is recommended that the TTS USB serial port adapter be used as it is extensively tested with all windows versions. Did you buy their USB adapter? Did you download and use the TTS USB driver from their web site for what ever version of windows you use? Also, make sure the windows com port configuration is such as (I think you are using com port 4) 9600 Bits/sec, 8 data bits, parity= none, stop bits=1, flow control = none. Then to Advanced setting tab - BM options latency timer to 1 ms which allows the interface to link up more consistently.
You could also try another com port in your laptop to see if it works better such as 5 on up to 12.

09-28-2013	#9
Franke Join Date: May 2013 Location: Beaver, PA Posts: 515	Re: Where has my DM log data saved to? A note in chapter 7 says TTS has found that MOST USB adapters fail to operate correctly for recording ALDL data. For this reason, it is recommended that the TTS USB serial port adapter be used as it is extensively tested with all windows versions. Did you buy their USB adapter? Did you download and use the TTS USB driver from their web site for what ever version of windows you use? Also, make sure the windows com port configuration is such as (I think you are using com port 4) 9600 Bits/sec, 8 data bits, parity= none, stop bits=1, flow control = none. Then to Advanced setting tab - BM options latency timer to 1 ms which allows the interface to link up more consistently. You could also try another com port in your laptop to see if it works better such as 5 on up to 12. Last edited by Franke; 09-28-2013 at 01:58 PM.