ZR-1 Net Registry Forums - View Single Post

Franke · 10-31-2013

Yep, I agree. It would be better to measure the TPS voltage as it is varied instead of calculating resistance. You would then get an operational view of the output of the TPS. You can use a computer power supply for a 5 volt signal voltage if you have one laying around.

10-31-2013	#114
Franke Join Date: May 2013 Location: Beaver, PA Posts: 515	Re: TOP END REFINISHING Yep, I agree. It would be better to measure the TPS voltage as it is varied instead of calculating resistance. You would then get an operational view of the output of the TPS. You can use a computer power supply for a 5 volt signal voltage if you have one laying around.