Quote:
Originally Posted by Franke
The sec vac pump should turn on when the key is placed in the run position unless the switch inside the vac pump senses greater than 12" of vacuum which is not possible with every thing disconnected. There is an inline fuse of 10 amps for the vac pump. Check at the pump to see if wiring is disconnected or the fuse is blown. Check for voltage there.
|
It came to me last night -
an hour after sackin' out - layin' there, thinkin' on it!!!
I did NOT plug in the forward 2 connectors on the DIS module.
Let's try it again, the RIGHT way...