Re: TOP END REFINISHING
Quote:
Originally Posted by Schrade
Where's the info on bleeding air from coolant lines? Doesn't the air push through after a couple of Closed Loop outings?
|
Getting The Air Out of the Coolant System
See Details here of how to get the Air Out of the Air Locked Water Pump Filling With Coolant and the Air Locked Water Pump
Quote:
Originally Posted by Schrade
You got a snappic of the 1/8 inch Allen Head Pipe plugs, that you have installed?
|
See Item #4 LT5 Eliminated Systems You can get the 1/8 inch Allen Head Pipe Plugs at Summit Racing as referenced in the LT5 Eliminated Systems post
There is also a 1/8 inch Allen Head Pipe Plug inserted in the top of each Injector Housing that makes sure you do not have coolant issues when removing the Plenum. That is the Pipe Plug that actually stops the coolant flow. The other (two each side) only plug the holes in the Plenum and TB.
Last edited by Dynomite; 11-25-2013 at 09:49 PM.
|