Quote:
Originally Posted by Dynomite
Let me check something...OK.....this is not going to help you immediately....I just took a look and cannot see the fittings going into the Power Steering Unit. But.......I would say if it happens to me I will make my own SS Braided Power Steering Lines.
I have never had one of these hydraulic lines with Aeroquip Reusable Fittings leak and they are much much tougher than original crimped fittings and easily replaced or adjusted if you want to at some point make them longer or shorter (the fittings are reusable). And......you will find a much better routing of the lines if you make them yourself by looking at the routing of the existing Power Steering Lines. The Aeroquip Reusable Fittings come in all sizes and angles to fit any situation. You can make your own oil cooler lines as shown here and Power Steering Lines or any other hydraulic line you might need on the ZR-1.
|
I believe the 16mm and 18mm Saginaw sealing system fittings might prove "challenging" for the fabrication.