ZR-1 Net Registry Forums - View Single Post

Josh · 02-02-2014

Thanks ya'll. Yes I will install them myself, that's half the fun!

My list so far:
-Mopar Viper 4.10 gear set PN P5007043
-Haibeck 4.10 Speedo gears
-Amsoil SEVERE GEAR 75W-90 Synthetic EP Lubricant (2 qts)
-Amsoil Slip lock additive
-Pinion & Axle yoke seals
-RTV silicone
-Pinion shims

What am I missing?

I was not planning to replace bearings, u-joints, etc. as everything works properly now and the car only has 13,000 miles, but I will inspect everything while it's apart of course.

Corey's site is down right now, but I hear he makes some nice headers, so I'll definitely be considering him for those.

02-02-2014	#10
Josh Join Date: Oct 2013 Location: Magnolia, TX Posts: 10	Re: Rear End Gear Ratio Change Thanks ya'll. Yes I will install them myself, that's half the fun! My list so far: -Mopar Viper 4.10 gear set PN P5007043 -Haibeck 4.10 Speedo gears -Amsoil SEVERE GEAR 75W-90 Synthetic EP Lubricant (2 qts) -Amsoil Slip lock additive -Pinion & Axle yoke seals -RTV silicone -Pinion shims What am I missing? I was not planning to replace bearings, u-joints, etc. as everything works properly now and the car only has 13,000 miles, but I will inspect everything while it's apart of course. Corey's site is down right now, but I hear he makes some nice headers, so I'll definitely be considering him for those.