Quote:
Originally Posted by mike100
My current set up is Hawk HPS with EBC rotors (cast in the UK). The HPS dust, but this combo dissipates heat properly.
 |
These look a lot like PowerSlot Rotors, same cadmium plating. I ran Powerslot Rotors with GrandSport Calipers and Performance Friction Z pads for a few years before I installed the 4 piston Brembos with big, hatted rotors.
It was more for the asthetics with the Fikses & LPE Aerobody than anything. The PowerSlot/GS Calipers/PerfFric-Z combination worked well for anything I ever did.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994
ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.