ZR-1 Net Registry Forums - View Single Post

Racinfan83 · 04-14-2014

Yeah I LOVE the color! Don't change it!
If someone put a "chip" in the car, (like a Haibeck chip) the power key defaults to the "full power" position. That said - you have a leak if the pump runs full time.
The seats are very easy to remove - there is a u shaped wire on the bottom front of the seat cushion that you push to get it out of the slot that holds it - and bottom cushion comes right out. Four bolts and a couple connectors and they are out. Make sure to lubricate all movement points.
I had the A/C on mine changed over to R-134. See if yours already has been switched. Doing this fixed mine (which didn't work before I had it changed)
Sounds like you have quite the project! Good Luck!

04-14-2014	#9
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Broght my new Z home today! Yeah I LOVE the color! Don't change it! If someone put a "chip" in the car, (like a Haibeck chip) the power key defaults to the "full power" position. That said - you have a leak if the pump runs full time. The seats are very easy to remove - there is a u shaped wire on the bottom front of the seat cushion that you push to get it out of the slot that holds it - and bottom cushion comes right out. Four bolts and a couple connectors and they are out. Make sure to lubricate all movement points. I had the A/C on mine changed over to R-134. See if yours already has been switched. Doing this fixed mine (which didn't work before I had it changed) Sounds like you have quite the project! Good Luck! Last edited by Racinfan83; 04-14-2014 at 07:16 AM.