Quote:
|
Originally Posted by ROGER E
Well just got back from Reno and have 16 Acell 158021 injectors. The connector is not the same so the groves don't line up. I guess I'm just suppose to work it on til the connector snaps on. My only other concerne is that this new accell injector is slight shorter then the stock ones. Will this cause problems with the fuel rail and how it bolts to the intake runners? I't looks as if I just bolt the fuel rail as is with the new injectors, that the injectors won't fully seat into the injector hole. Any thoughts?
Also....Summit Racing is quite the toy store!
|
You have to remove the tab on the connector for the primary injectors. I just used my dremmel tool with a small grinding wheel.
They don't bottom out into the fuel rail like the original Multecs did, you just clip them into the first slot on the top of the injector, I've had no problems with leakage.
Good luck!
Tom