ZR-1 Net Registry Forums - View Single Post

Peaven · 05-30-2007

...from the rear of my Z and it wasn't the u-joints, spindle washer, or lack of lube on the spindle. The leaf spring end bushings were toast...looked ok on the outside, but there was a whole lotta nothing in the center as the bolt was nice and shiny from flopping around on the leaf spring and knuckle eyelet....poly bushings are going in this time. The u-joints look ok but i'm going to replace `em anyway since I've got it apart.

05-30-2007	#1
Peaven Join Date: Jul 2006 Location: Omaha, NE Posts: 322	Found the cause of the clicking noise... ...from the rear of my Z and it wasn't the u-joints, spindle washer, or lack of lube on the spindle. The leaf spring end bushings were toast...looked ok on the outside, but there was a whole lotta nothing in the center as the bolt was nice and shiny from flopping around on the leaf spring and knuckle eyelet....poly bushings are going in this time. The u-joints look ok but i'm going to replace `em anyway since I've got it apart.