Re: Removing Transmission
Randy,
Pretty straightforward. I'm about to do the same except to ditch the Carolina stage 2 & LT4 pressure plate. You can do it easily. I've only done it on a 4-post with tranny jack--but by myself.
Doing a clutch while you're in there?
TTPs: add beam plates if not already, have some tyranny fluid, don't over tighten trans shaft bolts, check u-joints, remember short shifter while tranny out of car, watch MAP sensor if you tilt engine, align c-beam correctly on reinstall, exhaust clamps don't always appreciate multiple cycles.
Ted
|