ZR-1 Net Registry Forums - View Single Post - testing the ALCL. poor cold start running

Karl · 05-27-2014

More like a loose nut on one end of my fuel filter.

The end nearest the engine (the outlet side) was about 1/2 a turn loose until it became truly tight.

It is a hard angle to get at, especially if the car is not very high off the ground.

Hopefully this is the problem. Last night I primed the fuel pump and heard a drip and smelled fuel. Low and behold there was fuel on the garage floor. I could see and feel it seeping out the filter.

I need a lift in my garage!

I will start her in the morning and see what happens.

05-27-2014	#44
Karl Join Date: May 2013 Location: Chicago Posts: 982	Re: testing the ALCL. poor cold start running More like a loose nut on one end of my fuel filter. The end nearest the engine (the outlet side) was about 1/2 a turn loose until it became truly tight. It is a hard angle to get at, especially if the car is not very high off the ground. Hopefully this is the problem. Last night I primed the fuel pump and heard a drip and smelled fuel. Low and behold there was fuel on the garage floor. I could see and feel it seeping out the filter. I need a lift in my garage! I will start her in the morning and see what happens.