ZR-1 Net Registry Forums - View Single Post

QB93Z · 05-31-2014

Tom, Rich, Yun and Glenn positioning the LT5 over the engine bay. Dempsey is under the car to guide the engine mounts onto the frame:

Lowering the rear of the engine to allow aft movement so the crank pulley will clear the frame rail in front of the engine:

Here are some of the ZR-1s here for the day:

After the engine was in the car, we began Phase 2 to install all of the wiring, the hoses and front end accessories and the drive train.

Stay tuned....

Jim

05-31-2014	#2
QB93Z Join Date: May 2007 Location: Westminster, Maryland Posts: 3,684	Re: LT5 Installation (WAZOO Team) Tom, Rich, Yun and Glenn positioning the LT5 over the engine bay. Dempsey is under the car to guide the engine mounts onto the frame: Lowering the rear of the engine to allow aft movement so the crank pulley will clear the frame rail in front of the engine: Here are some of the ZR-1s here for the day: After the engine was in the car, we began Phase 2 to install all of the wiring, the hoses and front end accessories and the drive train. Stay tuned.... Jim Last edited by QB93Z; 06-01-2014 at 07:10 AM.