06-23-2014
|
#19
|
Join Date: Apr 2009
Location: ITALY
Posts: 261
|
Re: Bypassing the clutch switch
Quote:
Originally Posted by Dynomite
For installation of the relay next to the Wire Harness under the ECM....cut the Purple wire in the harness (leaving a lengh of purple wire going to starter) and add a short length to the end of that purple wire coming from the ECM. That wire then connects to the 1/4 inch connector on the Relay......The center connector on that relay is NOT used.
The other end of the purple wire going to starter you connect to the Relay with a 3/8 inch connector.
But not to worry....I am going out in an hour to redo my Relay (I want to use my new heat gun on that purple wire splice shrink tube which heat gun I did not have the other day). I will take photos of the whole installation for you showing the connectors. Just hang in there
I have this same modification on three 1990s and one 1991 and they ALL function perfectly.
|
Thank you so much!!!!!!   
|
|
|