ZR-1 Net Registry Forums - View Single Post

Paul Workman · 08-14-2014

Finally got around to installing an oil separator - enough oil in the plenum, already!

Moro$o makes a quality oil separator, and yesterday I got around to tucking one in the left headlight well.

I was able to find ONE acceptable tubing clamp to secure the AN line close to the PCV valves; on the lookout for some clamps to replace the temporary tie wraps.

Anyway, I'll be interested to see how it works. Anybody notice a reduction of oil in the plenum as result of using an oil separator??

Paul.

08-14-2014	#1
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,466	Oil catch can Finally got around to installing an oil separator - enough oil in the plenum, already! Moro$o makes a quality oil separator, and yesterday I got around to tucking one in the left headlight well. I was able to find ONE acceptable tubing clamp to secure the AN line close to the PCV valves; on the lookout for some clamps to replace the temporary tie wraps. Anyway, I'll be interested to see how it works. Anybody notice a reduction of oil in the plenum as result of using an oil separator?? Paul. Last edited by Paul Workman; 08-14-2014 at 08:30 AM.