Quote:
Originally Posted by cvette98pacecar
Cliff, I need 5 or 6 myself.
|
I am assuming you are talking the adapter shown only?
I could use a couple Oil Cooler Adapters myself but as you probably know, Jerry and White Racing make and sell the complete set of SS Braided Oil Cooler Lines (crimped fittings) including the hoses already assembled with the adapter (but not the Adapter separate). Jerry's Adapters are a one piece adapter which Adapters discussed in this thread are taken from the original Jeffvette designed three piece with the two threaded nipples separate. The SS hoses in this thread are designed using Reusable Aeroquip type fittings. The three piece adapters are the Cats Meow
Very few guys would make their own SS Braided hoses with reusable fittings although all it requires is a vice and couple crescent wrenches. An angle grinder with cut off wheel is perfect for cutting the SS Braided hoses but you can use a hacksaw
Carter is aware in 2008 and it appears he declined machining the Oil Cooler Adapter back then
LT5 Oil Cooler Adapter
We shall see but I do know the secondchance design is the best 