10-04-2014
|
#14
|
Join Date: Jan 2012
Location: Wisconsin
Posts: 885
|
Re: Clutch & Flywheel Replacement
Good work 
Quote:
Originally Posted by c4koh
The 5 bolts that connect the transmission to the bellhousing are quite short, and if you need that last inch, they wont go through the transmission bolt and bite into the housing... So, if you have a longer, same-spec bolt, you can use this to bite and pull it in - this worked a charm... transmission was then mated, and other 4 bolts went in, then replaced the temporary bolt with that.
|
This is a great tip
__________________
1990 ZR-1 #2180 Red/Black
Many of the usual mods for 460HP, tuned by Marc Haibeck
ZR-1 Net Registry Member #1548
|
|
|