Quote:
Originally Posted by A26B
May be the pilot bearing/bushing.
|
X2 I wuz going to say the same thing; pilot bushing/bearing or throwout...would be my guess, based on the description.
The only
thing about removing the drive line on the C4s is the C-beam. One: It should be properly centered to reduce wear and noise on the U joints. Bill Boudreau )at (602) 319-6575) can provide some 48mm and the 28mm gauges for that purpose, OR you can make some yourself, easily enough.
Bill also provides
C-beam plates which IMO are worth every penny, especially if you have big hands.