ZR-1 Net Registry Forums - View Single Post

apbreg · 01-08-2015

There is a light activation switch on both doors that tells the car that the door is closed. The switch has a tip that extends out about 3/8" from full in to full out. Take a flat tipped screwdriver or a jack knife and get the edge of the screwdriver or jack knife behind the edge of the tip and pull it out to full extension. Close the door and it will push the tip back in the exact right amount and the door ajar light will stop flashing. Do one door at a time, it's probably not both switches. Since the weather stripping on the PS door is a problem, it could well be the PS side door switch.

01-08-2015	#2
apbreg Join Date: Oct 2014 Location: Pennsylvania Posts: 7	Re: 1990 ZR1 Interior Light Flicker There is a light activation switch on both doors that tells the car that the door is closed. The switch has a tip that extends out about 3/8" from full in to full out. Take a flat tipped screwdriver or a jack knife and get the edge of the screwdriver or jack knife behind the edge of the tip and pull it out to full extension. Close the door and it will push the tip back in the exact right amount and the door ajar light will stop flashing. Do one door at a time, it's probably not both switches. Since the weather stripping on the PS door is a problem, it could well be the PS side door switch.