ZR-1 Net Registry Forums - View Single Post

gbrtng · 01-09-2015

slap a couple layers of duct tape on the sill strike plate - it is the black plastic part that
the switch contacts and collapses with time. See if the flicker goes away - cheaper and easiest way to see if the switch is bad. You want to see if the switch is at the ragged edge of making no-contact with the door closed.

duct tape and WD-40 - fix everything fast.

01-09-2015	#10
gbrtng Join Date: Feb 2006 Location: San Antonio area Posts: 1,183	Re: 1990 ZR1 Interior Light Flicker slap a couple layers of duct tape on the sill strike plate - it is the black plastic part that the switch contacts and collapses with time. See if the flicker goes away - cheaper and easiest way to see if the switch is bad. You want to see if the switch is at the ragged edge of making no-contact with the door closed. duct tape and WD-40 - fix everything fast. __________________ “Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer