ZR-1 Net Registry Forums - View Single Post - FS-Complete Valvetrain and cams- 700hp

tpepmeie · 02-07-2015

All,
Now that I have the new cam cores, I have decided to switch over to mechanical (solid) followers on this version of the 427. And bigger cams, in search of 800 hp.

So, I am offering my entire valvetrain from build 1 for sale. It is a matched set, so I won't break it up--the components have been selected designed to work together as a system. This isn't for the faint of heart, but it will make an honest 700 crank hp, with a good set of cylinder heads.

The entire system has maybe 4 hours of dyno time and 2000 miles of spirited driving.

(4) custom billet camshafts (Integral Cams)
- Intake: 255@.050, .500" lift
- Exhaust: 244@.050, .465" lift
(16) Stainless intake valves, 39.5mm (SI Valves)
(16) Stainless exhaust valves, 35.5mm (SI Valves)
(32) Custom Titanium retainers (CHE Precision)
(32) Custom hardened steel spring seats (CHE)
(32) Valve locks / keepers (Ferrea)
(32) Hydraulic lightweight followers /lifters (INA)
(32) Valve springs (Eibach)

I will help the buyer with setup advice, if needed.

Price: now $8000

Pictures:

02-07-2015	#1
tpepmeie Join Date: Aug 2005 Location: Fishers, IN Posts: 812	FS-Complete Valvetrain and cams- 700hp All, Now that I have the new cam cores, I have decided to switch over to mechanical (solid) followers on this version of the 427. And bigger cams, in search of 800 hp. So, I am offering my entire valvetrain from build 1 for sale. It is a matched set, so I won't break it up--the components have been selected designed to work together as a system. This isn't for the faint of heart, but it will make an honest 700 crank hp, with a good set of cylinder heads. The entire system has maybe 4 hours of dyno time and 2000 miles of spirited driving. (4) custom billet camshafts (Integral Cams) Intake: 255@.050, .500" lift Exhaust: 244@.050, .465" lift (16) Stainless intake valves, 39.5mm (SI Valves) (16) Stainless exhaust valves, 35.5mm (SI Valves) (32) Custom Titanium retainers (CHE Precision) (32) Custom hardened steel spring seats (CHE) (32) Valve locks / keepers (Ferrea) (32) Hydraulic lightweight followers /lifters (INA) (32) Valve springs (Eibach) I will help the buyer with setup advice, if needed. Price: now $8000 Pictures: Last edited by tpepmeie; 10-24-2015 at 04:42 PM.