ZR-1 Net Registry Forums - View Single Post

gbrtng · 05-19-2015

The stock lines have steel braiding too - cut one apart some time. If you use any aftermarket part, make sure it is DOT compliant. The ones on my 91 are TUV compliant (European) and that is equal to or better than DOT as I was advised.

CORRECTION: I cut open a stock rear line and there are two layers of braided fabric instead of one braid of steel like the aftermarket stuff.

05-19-2015	#8
gbrtng Join Date: Feb 2006 Location: San Antonio area Posts: 1,182	Re: Brake Recommendations Please The stock lines have steel braiding too - cut one apart some time. If you use any aftermarket part, make sure it is DOT compliant. The ones on my 91 are TUV compliant (European) and that is equal to or better than DOT as I was advised. CORRECTION: I cut open a stock rear line and there are two layers of braided fabric instead of one braid of steel like the aftermarket stuff. __________________ “Buy the best example of what you want, and pay whatever it takes. That way, you cry only once.” ~ Bruce Meyer Last edited by gbrtng; 05-19-2015 at 12:01 PM.