ZR-1 Net Registry Forums - View Single Post

Bearly Flying · 06-04-2015

Thanks for the schematic and the info.

On the bike it is very simple, the 12 volt feed goes direct to the Pos side of the coils, the Ignition module is on the Neg side to ground,so very straight forward.

Oh well, live and learn...

Thanks Guy's

06-04-2015	#6
Bearly Flying Join Date: Dec 2012 Location: Ponoka, Alberta, Canada Posts: 158	Re: 12 Volt relay to feed the coils??? Thanks for the schematic and the info. On the bike it is very simple, the 12 volt feed goes direct to the Pos side of the coils, the Ignition module is on the Neg side to ground,so very straight forward. Oh well, live and learn... Thanks Guy's