ZR-1 Net Registry Forums - View Single Post - My car has every Selective Ride Control fault code

JohnnyRockit · 06-21-2015

And progress...

This time I went out and turned the ignition on and jumpered A & C 3 times with the ignition on the whole time ( had tried this before, but I think I wasn't grounding for the required 2 seconds) , and the codes cleared, all except for code 21.

That indicated a left front actuator issue. I pulled the actuator off and it did move back and forth when the ignition was turned on. The FSM then pointed to the connector, so I re-seated the connector and the "Service Ride Control" light is no longer on!

Yay! Thanks everyone for the help in clearing this up!

06-21-2015	#7
JohnnyRockit Join Date: May 2015 Location: Dallas, TX Posts: 17	Re: My car has every Selective Ride Control fault code And progress... This time I went out and turned the ignition on and jumpered A & C 3 times with the ignition on the whole time ( had tried this before, but I think I wasn't grounding for the required 2 seconds) , and the codes cleared, all except for code 21. That indicated a left front actuator issue. I pulled the actuator off and it did move back and forth when the ignition was turned on. The FSM then pointed to the connector, so I re-seated the connector and the "Service Ride Control" light is no longer on! Yay! Thanks everyone for the help in clearing this up!