Quote:
Originally Posted by Leroy1
I have a set of "new" gears (over 15 years old but never installed). Included is a new crush sleeve and pinion nut.
They came with a '91 ZR-1 that I bought, but never installed them. I was told they are the Viper Super Dana 44's, but I have no way to verify.
Price is $300 plus shipping. If you know someone in central/east Texas that can inspect and verify to your satisfaction what they are, feel free to have them contact me. Or I can forward to you the stampings and other ID on the gear set.
S. L. Sikes
6102 Willow Springs Road
Burton, Texas 77835
979-251-7167
LeeandMaryjane@gmail.com |
Measure the outer diameter of the ring gear and confirm either a 216mm or a 226mm dimension OR a number very close to either of those #'s. That would indicate a good bit regarding the package, you might want to see if the ring gear bolts are 3/8 or maybe 7/16. There should be a 5 digit number on each gear - you could post those also.