ZR-1 Net Registry Forums - View Single Post

zr1esq · 07-13-2015

Ok with ignition on and not running. I pulled the plug from the switch under the overflow tank and measured .578 volts. Then next to the motor, there are two more switches. again I measured .578 on one switch - the other switch I unplugged and the secondary cooling fan turned on. When I pulled both switches no voltage was measured at either switch. What do you think?

07-13-2015	#5
zr1esq Join Date: Jan 2015 Location: Long Island Posts: 16	Re: A/C Compressor Not engaging?? Ok with ignition on and not running. I pulled the plug from the switch under the overflow tank and measured .578 volts. Then next to the motor, there are two more switches. again I measured .578 on one switch - the other switch I unplugged and the secondary cooling fan turned on. When I pulled both switches no voltage was measured at either switch. What do you think?