Quote:
Originally Posted by BlackZR1
Just bought a 1990 ZR-1 with 10,500 miles. Basically a new 25 year old car! It seems to have most of the original coolant hoses. Can anyone suggest a source for a complete coolant hose kit?
This is a great site and I will spend a lot of time studying the postings.
Thanks,
Roger
Pittsburgh, PA
|
Have Fun Roger and Welcome 
I would replace ALL Original Coolant Hose Clamps also........Aligning the Hose Clamps so the tightening screw can be easily reached by socket or screw driver. You may have to use a razor blade to cut lengthwise on some hoses after removing the Stock Hose Clamp to remove the Original Coolant Hose. I use a bit o Permatex on the inside ends of ALL New Coolant Hoses.
Left Click on any of the Links cited below including Links in Signature for more detailed information
Haibeck Coolant Hoses
Jerry's Coolant Parts
ENGINE COOLING
Post 7 - LT5 Thermostats
Post 8 - LT5 Radiator and Initial Coolant Fill Tricks
Post 9 - Using HVAC Display for Engine Coolant Temperature
Post 10 - Water Pump, Coolant Temperatures, and Coolant
Post 11 - Radiator Debris Screens
Post 12 - Getting The Air Out of the Coolant System
Post 13 - TB Coolant Discussion
Post 14 - Coolant Characteristics (Mix, Pressure, Elevation)
Post - Eliminated TB Coolant Photos and Details