View Single Post
Old 11-01-2015   #41
Dynomite
 
Dynomite's Avatar
 
Join Date: Aug 2009
Location: South Dakota/California
Posts: 3,817
Default Re: Bypassing the clutch switch

Quote:
Originally Posted by carnold View Post
Looking for a start cure. I have a 90 ZR1 and for years it starts fine but after I stop and leave it for an hour or so and come back I push in the clutch, turn the key, all proper lights come on but starter will not turn over. I leave it for 2 or 3 hours and it will then start fine. I bypassed the VATS system but still have the problem. Is it the clutch switch or the starter relay or something else. It is a 3700 mile car.
Does the starter solenoid move and no start or solenoid sticky?

Do lights dim when you turn key to start?

I always install the Starter Relay and along with that always recondition the starter solenoid and points (and check armature bearings for smoothness and starter Brushes).
Dynomite is offline   Reply With Quote