View Single Post
Old 12-08-2015   #18
XfireZ51
 
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,686
Default Re: Idle to high around 2000rpms

Quote:
Originally Posted by edram454 View Post
no the prom was not adjusted yet. my car has the zimmer chip installed and had headers and ported intake already. I just had the injector housings re-ported and totally hogged out. I will eventually take it to have a dyno tune and burn a chip for it. the car runs very good and will probably run better with a good dyno tune. I had run out of time and just wanted my car back. I am taking care of a few things on the car to get it were it should be and will fine tune it later. he removed the intake injector bosses and ported the rest to the max and port matched to the head. I will send it back later and port- out the heads and then re-tune. I will take care of that idle speed later.

ed ramos #3028
A "dyno tune" isn't going to do what is needed. At best, it optimizes for WOT ONLY. And although your Zimmer chip was meant for headers and porting, you're moving more air now and that needs to be adjusted for. In the meantime, enjoy the car.
XfireZ51 is offline   Reply With Quote