[Dynomite]

There is a BIG difference between the 90'/91' and the 95' (Maybe 93' and 94') in regard to the storage for the tools. On the 95' there is only one compartment (behind the Passenger Side) for tools. And there is NO Glove Box on the 95' But there is a Trick

The Bottom Seat Cushion is easily removed by pushing down on the wire clip in front of the Seat frame. The Cushion can then be easily removed totally and you will observe two straps going from the front to the rear of the frame.

Under those straps and above the bottom of the seat frame you can store your Manual and Jumper Cables on the Drivers Side.

On the Passenger Side I store the Extension Hex Sockets and the ALDL Code Reader and Adapter.




Beside the Passenger Seat I store the Lug Wrench and the Tow Adapter.





Regarding alternators and other spare parts. Anything original I think needs Restoration including the Alternator, Starter, Serpentine Belt, Belt Tensioner......I rebuild such that there is NO reason to carry those parts as spares.

And....I do carry Jumper Cables and the Tow Adapter.