ZR-1 Net Registry Forums - View Single Post

RussMcB · 03-21-2016

Thanks for the responses. Good info.

I emailed Marc and he responded pretty quickly. Regarding the tight new pin fit, he suggested I look to see if the hole is oblong. I'll do that (hopefully tonight) then decide next steps.

Regarding the mysterious plastic piece, he said, "That's the high beam light switch cam. Reach down and move the high beam switch. The way that the rod moves should help you determine how to position the cam.".

03-21-2016	#7
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,148	Re: Oversize Steering Column Pivot Pin Thanks for the responses. Good info. I emailed Marc and he responded pretty quickly. Regarding the tight new pin fit, he suggested I look to see if the hole is oblong. I'll do that (hopefully tonight) then decide next steps. Regarding the mysterious plastic piece, he said, "That's the high beam light switch cam. Reach down and move the high beam switch. The way that the rod moves should help you determine how to position the cam.".