Quote:
Originally Posted by SCCAForums
For those with stock ZR1's, are there any oem equivalent clutch and pressure plates that still will work with OEM Dual Mass Flywheel?
Best Regards,
Dave
|
The "replacement" available today for the stock clutch is the L98 & LT1/4 version which is a shorter height pressure plate that is also 300lbf less than the stock ZR-1 unit. It will work but requires pressure plate bolts for thew L98 & LT1/4 which are shorter than the ZR-1 pressure plate bolts. (IMPORTANT if you want the clutch to work after it's installed
)
Available @ Rock Auto & probably your local auto parts store.
Valeo PN 52802204.
__________________
Jerry Downey
JERRYS LT5 GASKETS & PARTS
http://www.jerrysgaskets.com
1994
ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc.
2016 Black-Red, 3LT-Z51 Auto 8-speed.