ZR-1 Net Registry Forums - View Single Post

A26B · 06-10-2016

They are hard to remove. Dry, 25 yr old o-rings are the problem.
I pry the rail up with the wooden handle of a small ball peen hammer.

Replace with all new o-rings, lightly lubed with motor oil, attach injectors to the rails & press down evenly until the rail brackets are down & bolt in place.

06-10-2016	#3
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,403	Re: Injector Rail They are hard to remove. Dry, 25 yr old o-rings are the problem. I pry the rail up with the wooden handle of a small ball peen hammer. Replace with all new o-rings, lightly lubed with motor oil, attach injectors to the rails & press down evenly until the rail brackets are down & bolt in place. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.