ZR-1 Net Registry Forums - View Single Post

Chris26 · 06-11-2016

Hi, Thanks for the reply!!!. The corrosion in the rails is next to none...when I pulled the rails a little bit of water got absorbed into my towel.Then the rest smelled (and tasted) like raw fuel. The tank was removed and cleaned the year prior. The secondary injectors look like S#$T!!!!! I filled the tank full of premium and put a fuel treatment in for any remaining condensation... I plan on running the pump via the red jumper to clear the lines before firing the beast up after I go through the engine.

06-11-2016	#8
Chris26 Join Date: Jun 2016 Location: Canada Posts: 53	Re: Injector Rail Hi, Thanks for the reply!!!. The corrosion in the rails is next to none...when I pulled the rails a little bit of water got absorbed into my towel.Then the rest smelled (and tasted) like raw fuel. The tank was removed and cleaned the year prior. The secondary injectors look like S#$T!!!!! I filled the tank full of premium and put a fuel treatment in for any remaining condensation... I plan on running the pump via the red jumper to clear the lines before firing the beast up after I go through the engine.