ZR-1 Net Registry Forums - View Single Post

XfireZ51 · 06-12-2016

The RCs are rated 20lbs @43.5 psi, which is 10% less than what the stock calibration is using (22.7lbs) for calculating pulse width. Additionally, the electrical characteristics of the RCs very likely different from the Bosch. I believe RC can provide the Injector Offset v Batt Voltage values for their injectors.
Technically speaking, you would want to make those changes to the calibration
and see how close the stock VE tables are at that point. It will also have an effect on WOT tune.
And yes I know that people have been using RC injectors or other non-stock injectors without having made those changes.

06-12-2016	#14
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,686	Re: Injector Rail The RCs are rated 20lbs @43.5 psi, which is 10% less than what the stock calibration is using (22.7lbs) for calculating pulse width. Additionally, the electrical characteristics of the RCs very likely different from the Bosch. I believe RC can provide the Injector Offset v Batt Voltage values for their injectors. Technically speaking, you would want to make those changes to the calibration and see how close the stock VE tables are at that point. It will also have an effect on WOT tune. And yes I know that people have been using RC injectors or other non-stock injectors without having made those changes.