Thread: ZR1 brake lines
View Single Post
Old 10-26-2007   #9
Jeffvette
Guest
 
Posts: n/a
Default Re: ZR1 brake lines

Quote:
Originally Posted by petefias
To determine if ALL the extra width is on the outside or some is on the inside we need the offset for the standard wheel and the ZR1 wheel. We know the offset for the ZR1 wheel is 36mm for the rear and 56mm for the front.

Do you know what is the offset on the standard C4 wheel, or are you just guessing?
Standard wheel is the same size/offset as the ZR-1 front.

There probably is a line difference, but it is negligable in the aftermarket hoses. Just make sure you get them pointed away from the tire when you tighten them down.
  Reply With Quote