Quote:
|
Originally Posted by Jeffvette
Standard wheel is the same size/offset as the ZR-1 front.
There probably is a line difference, but it is negligable in the aftermarket hoses. Just make sure you get them pointed away from the tire when you tighten them down.
|
GBRTNG,
Comparing the 11" wheels vs. 9.5" wheels on the rear of the car the tire would stick out 20mm on the outside and 18mm on the inside (based on 36mm and 56mm offset).
So not all of the width is on the outside under these conditions. That will explain the slightly longer brake line on the Z. If the line is properly turned the standard C4 length line should clear on the ZR1. Would it clear a 335 tire? I wonder.