Quote:
Originally Posted by A1990
Chances are with your 368 the DAG was long gone before you cleaned the throttle body. As it was probably enlarged to 63mm.
The other guys are correct, you are not going to find a LT5 throttle body unless its at Jerry's or on eBay, etc.
The good news is Marc will rebuild your throttle body, if indeed that is the source of the vacuum leak, and have it back to you within a couple days. I had Marc rebuild mine. I pulled it off and sent it to Marc. He had it the next day and rebuilt it, then put in back in the mail and I had it the next day. I was down for about 3 or 4 days total.
Good luck.
|
That makes me feel better, thanks! I'm going to pull the plenum again and double check for leaks, get a better look at the throttle body, etc...
I've done it before, but i'm a little confused regarding draining coolant.. The other times I've pulled it I didn't do that. How/how much should I drain?
anyone have a link for the correct procedure?
Thank you guys so much for helping me!