ZR-1 Net Registry Forums - View Single Post

mike100 · 02-07-2017

I would suggest lowering the fronts with coil overs. There aren't very many unmolested ZR-1 front springs left. Don't cut the rubber bushing off of yours to find out you don't like how low it rides or how much softer the preload on the spring gets.

The lowering bolts on the rear are super easy and a half hour job to swap back.

02-07-2017	#8
mike100 Join Date: Feb 2011 Location: San Marcos CA Posts: 1,786	Re: street / track alignment I would suggest lowering the fronts with coil overs. There aren't very many unmolested ZR-1 front springs left. Don't cut the rubber bushing off of yours to find out you don't like how low it rides or how much softer the preload on the spring gets. The lowering bolts on the rear are super easy and a half hour job to swap back.