ZR-1 Net Registry Forums - View Single Post

Demps · 03-16-2017

Take out the fill plug first. I think it's a --mm BMW/vw tool at auto parts. Use a crescent wrench (or open end wrench) to get right up to fill/drain plug so as not to round off plug. Pipe fitting tape or thread sealant on install. Filling is a bear but the $5 hand pump at auto parts work great. 2.2qts.
Ted

Gary is correct below on size--deleted to not confuse anyone.

03-16-2017	#3
Demps Join Date: Jan 2006 Location: Niceville Posts: 1,001	Re: ZF fluid change time! Take out the fill plug first. I think it's a --mm BMW/vw tool at auto parts. Use a crescent wrench (or open end wrench) to get right up to fill/drain plug so as not to round off plug. Pipe fitting tape or thread sealant on install. Filling is a bear but the $5 hand pump at auto parts work great. 2.2qts. Ted Gary is correct below on size--deleted to not confuse anyone. Last edited by Demps; 03-16-2017 at 08:07 PM.