[Tripler]

I also see your guys points of having the jack stands with load on them but that is a bit difficult to do because of the very secure way the lift supports the car . There are only 2 positions that the lift will lock itself into place . I guess I could make some wedges out of more hockey pucks . Another issue is that they do not recommend using the unit with out having a car on it so adjustments would have to be made under load only . Also looking at the support bar I trust that locking mechanism more than I would a jackstand . From what I have observed the bracket transfers support to both sides of the lifts framing so that it is one support , it is actually holding both sides at once . I can only guess what the sheer on those bolts would be but it must be 20,000 lbs or way way more because of the test I have seen them do on YouTube .